Product Description
Product Name: OSi HIOSil 1090
Chemical Name: vinyl siloxane oligomer
Chemical Formula: C3H10O2Si2
Properties
OSi HIOSil 1090 is a colorless, nearly odorless low-viscosity liquid.
OSi HIOSil 1090 is an excellent compatibilizer between inorganic fillers (e.g., kaolin, MDH, ATH) and organic polymers (e.g., EPDM, EVA, PE).
The high boiling point of OSi HIOSil 1090, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint, it should be noted that the amount of released hydrolysis methanol (VOC) is significantly reduced compared to monomeric vinyl silanes.
Vinyl Silane Polymer OSi HIOSil 1090, A major field of application for mineral-filled compounds is the cable industry. EPDM and EVA can be processed into highly filled cable compounds through the adhesion-promoting and hydrophobic effect of OSi HIOSil 1090.
The EPDM and EVA polymers with OSi HIOSil 1090 are for the halogen-free, non-toxic, environmentally-friendly flame retardant cable compounds (HFFR) based on ATH and MDH.
In addition, OSi HIOSil 1090 can be used in many other applications such as filler and pigment coating, dispersions, etc.
Typical Technical Data
The values below are not intended for use in preparing specifications. Please confirm with us prior to writing specifications on this product.
Appearance: colorless
Density (20°C) g/cm3: Approx 1.0
SiO2-content : 54.0%±2.0%
Viscosity Dynamic 25℃ mPas: 2-4
Applications
Typical property improvements obtained by using OSi HIOSil 1090 in filled polymers are:
Improve filler dispersion
Good processability significantly
Reduced water-uptake
Excellent balance between tensile strength and elongation at break at a high level
Improved chemical resistance
Higher impact strength
Higher wear resistance
Strongly reduced tendency to crack under pressure
Safety & Storage
Customers should review the latest MSDS and label for product safety information, safe handling instructions, personal protective equipment if necessary, and any special storage conditions required for safety. MSDS is available at your request.
Kept in a low temperature, dry and ventilated place, avoid direct sunlight.
One year in ventilating, cool and dry area.
Remarks
This technical data sheet is only used for internal quality control within OSi Holding Limited.
All rights reserved.
Packaging
25 kg /drum, it loads 16 MT/ 20 FCL with pallet
200 kg /drum, it loads 16 MT/20 FCL with pallet
1000 kg in plastic drum, 21.2 MT/20 FCL with pallet.
