OSi PEMS 410 CAS 128192-17-6

Product Description

Chemical Description: Polyether siloxane copolymer 

Other descriptions: 

Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, 3-hydroxypropyl group-terminated

CAS NO.: 128192-17-6

Properties

OSi PEMS 410 shows outstanding slip and excellent anti-crater properties. It is highly effective and can be used in a broad range of different coatings and inks. 

Typical Technical Data 

The values below are not intended for use in preparing specifications. Please confirm with us prior to writing specifications on this product.

Appearance: clear liquid

Active matter content: 100%

Applications

• OSi PEMS 410 is an important additive in applications such as wood coatings, General industrial coatings, Architectural paints, and printing Inks.

• The recommended amount of formula to add the total amount of 0.05 - 0.5%.

• The highest available in the printing ink is up to 1.0, pre-diluted when supplied, or can be added directly to the coating.

• Recommended pre-diluted with a solvent will facilitate the addition and mixing.

Safety & Storage

• Customers should review the latest MSDS and label for product safety information, safe handling instructions, personal protective equipment if necessary, and any special storage conditions required for safety. MSDS is available at your request.

• Keep away from heat and open flame. When stored at or below 35 ℃ in the original unopened containers, this product has a usable life of 12 months from the date of production.
  

Remarks

This technical data sheet is only used for internal quality control within OSi Holding Limited.

All rights reserved.

Packaging

In 25kg, 200kg drum and 1000kg IBC