Product Description
Product Name: Polyether-modified silicon leveling agent
Typical Technical Data
The values below are not intended for use in preparing specifications. Please confirm with us prior to writing specifications on this product.
Composition: Polyether-modified polydimethylsiloxane
Appearance: Slight yellowish clear liquid(paste at low temperature)
Density: 1.01-1.05g/ml (25±1)℃
Viscosity: S-Z (Bubble viscometer)(25±0.2)℃
Active substance: 100%
Flash point: ＞100℃
Note: This datasheet is intended to give typical results, not standard. Subject to COA.
Properties
Excellent compatibility in varnish.
Provide a stronger reduction of the surface tension.
Reduce the friction coefficient. Increase slip and improve scratch resistance and anti-stick
Suit for UV high-speed printing ink, and UV optical fiber ink
Hazy and viscous may occur at low temperatures. It would become clear and flow after being heated. This will not influence the quality
Applications
UV Cure
Application Recommendation
Transparency in varnish 5
Defoaming 1
Dynamic surface tension 5
Static surface tension 5
Slip 5
Prevent orange peel 1
0=unavailable 5=very effective
Incorporation
Easy to add with pre-diluted solvent the same as that in the coating system. Can be added as a post-addition.
Suggested Addition
Addition to total formulation 0.01-0.5%
Safety & Storage
Customers should review the latest MSDS and label for product safety information, safe handling instructions, personal protective equipment if necessary, and any special storage conditions required for safety. MSDS is available at your request.
Keep intact for 24 months in the original package. Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
Packaging
25KG/180KG
