Product Description
Product Name: Polyether-modified silicon leveling agent
Typical Technical Data
The values below are not intended for use in preparing specifications. Please confirm with us prior to writing specifications on this product.
Composition: Polyether-modified polydimethylsiloxane with OH functional group
Appearance: slight yellowish clear liquid(paste at low temperature)
Density: 1.01-1.05g/ml (25±1)℃
Viscosity: F-M (Bubble viscometer)(25±0.2)℃
Active substance: 100%
Flash point: ＞100℃
Note: This datasheet is intended to give typical results, not standard. Subject to COA.
Properties
Organic silicone copolymer with chemical structure ABA including reactive group. Increasing leveling, wetting and gloss for paints and ink.
Hazy and viscous may occur lower than 20℃. It would become clear and flow after being heated. This will not influence the quality.
Applications
UV Cure
Incorporation
The additives can be incorporated directly, or added to the resin after diluted with organic solvent or water.
Suggested Addition
Addition to total formulation 0.05-0.5%
Safety & Storage
Customers should review the latest MSDS and label for product safety information, safe handling instructions, personal protective equipment if necessary, and any special storage conditions required for safety. MSDS is available at your request.
Keep intact for 24 months in the original package. Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
Packaging
25KG/180KG
