Product Description
Product Name: OSi PEMS V1400
Chemical Name: polyether modified polysiloxane
Properties
To increase the substrate wetting.
To avoid cratering.
To improve the surface smoothness and scratch resistance.
To improve gloss, orientation and leveling.
Good compatibility. Apply to all coating systems, such as solvent-based, solvent-free based and water-based coating systems.
Typical Technical Data
The values below are not intended for use in preparing specifications. Please confirm with us prior to writing specifications on this product.
Appearance: Colorless to amber transparent oily liquid
Viscosity: 800-2000cps
Reflexable index: 1.430-1.440
Non-volatile matter (120℃/2h, %): >97
Applications
OSi PEMS V1400 is effective at low concentrations.
The dosage depends upon the type of formulation, the solvent, the resin system and the total solid content.
The recommended dosage is 0.1~1.0% wt% of the total formulations.
A thorough application test is necessary to get an ideal result.
Added during the grind or let-down, or can be post-added.
It has different characteristics when used in different systems.
Safety & Storage
Customers should review the latest MSDS and label for product safety information, safe handling instructions, personal protective equipment if necessary, and any special storage conditions required for safety. MSDS is available at your request.
Transportation as non-dangerous goods. Store in the cool and ventilated warehouse. 12 months of storage period.
Remarks
This technical data sheet is only used for internal quality control within OSi Holding Limited.
All rights reserved.
Packaging
25Kg/200Kg plastic drum.